Innolux LCD Display Replacement: Drop-in Equivalents for legacy Panels
“Most “drop-in replacement” claims quietly break at the pin level. The fastest way to a real cross-reference is the old part number plus the failure you observed.”
Quick Answer
Innolux, one of the world's largest TFT LCD panel fabs, regularly retires older panel generations as it moves capacity to newer sizes and resolutions. When an Innolux panel goes end-of-life, a drop-in replacement is a module that matches the original's outline dimensions, connector position and pinout, interface (RGB, LVDS or MIPI) and driver behavior — so your existing board and firmware is verified per project. RONEN supplies documented engineering cross-references for legacy Innolux panels plus 190+ standard industrial TFT modules, with 5+ year supply planning and samples per the agreed project plan. Send the Innolux part number for a matched datasheet once the project scope is confirmed.
Rather than publish part-number mappings we cannot evidence, we keep the cross-reference honest: send us the Innolux P/N and we confirm the match against outline, connector position, pinout and interface before anything is quoted. What we can state today is which RONEN size families are standard and therefore worth checking against your EOL notice.
| Size family | Typical use | RONstandard (from our live spec base) |
|---|---|---|
| 4.3" class | HMIs, instruments | 26 models standard, e.g. RG-T043BPI-01ND / RG-T043BPS-01ND / RG-T043BPS-04ND |
| 5.0" class | Industrial controllers | 22 models standard, e.g. RG-T050BMSA-01 / RG-T050BPH-01 / RG-T050BPH-01P |
| 5.7" class | Handheld / POS | 2 models standard, e.g. RG-T057BGEA-01DE / RG-T057BGEA-01PDE |
| 7.0" class | HMI, POS | 40 models standard, e.g. RG-T070BAE-32 / RG-T070BAEA-27ND / RG-T070BAHA-01 |
| 10.1" class | Panel PCs, medical | 15 models standard, e.g. RG-T101BAE-01ND / RG-T101BAE-01PD / RG-T101BAH-01 |
Why Innolux panels reach EOL
Innolux supplies a huge share of the small-to-mid industrial panels used in HMIs, instruments, medical devices and automotive displays. Like all fabs, it periodically announces EOL on older part numbers (often the AT-series) as production shifts. Because so many OEM designs standardized on Innolux glass, an EOL notice creates a large replacement market almost overnight.
What a true drop-in must match
| Parameter | Must match the original Innolux panel |
|---|---|
| Outline dimensions | Fits the same bezel/cutout |
| Connector type & position | Plugs into the same FPC/socket |
| Pinout | Same signal assignment |
| Interface | RGB / LVDS / MIPI — same as original |
| Driver IC / init sequence | Firmware-compatible |
| Supply voltage | Same backlight + logic power |
| Active area | Same visible window |
How to get your match (3 steps)
1. Send the Innolux part number (and a photo of the connector if possible) via the contact form at odmlcd.com.
2. We return a matched RG module datasheet + outline drawing + sample.
3. You test-fit on your existing board — a documented replacement still needs engineering confirmation.
Common Innolux sizes we replace
| Innolux size class | Typical use | RONEN path |
|---|---|---|
| 4.3" (e.g. AT043 series) | HMIs, instruments | RG 4.3" family |
| 5" / 5.7" | Industrial controllers | RG 5" family |
| 7" | HMI, POS | RG 7" family |
| 10.1" | Panel PCs, medical | RG 10.1" family |
Every family above is drawn from our own 190+ model spec base, so the counts are verifiable. Exact Innolux-to-RG pin-level equivalence is confirmed per request because two panels sharing a size class rarely share connector and pinout.
If no exact drop-in exists
RONEN offers custom ODM to match the original's mechanical footprint and interface — same outline, same connector, same signal — so your board still doesn't change. Factory-direct supply and permanent-stock options for long-tail service demand.
FAQ
Can you replace a legacy Innolux LCD panel?
Yes — RONEN maintains documented engineering cross-references for many legacy Innolux panels, matching outline, connector, pinout and interface. Send the part number for a match.
Do I need to redesign my board?
For a documented, no — the replacement matches connector position, pinout and interface so your existing board and firmware is verified per project.
How fast can I get a replacement sample?
Samples per the agreed project plan; datasheet and quotation after scope confirmation.
Why does Innolux legacy panels?
Fabs shift capacity to newer sizes and technologies; older part numbers get EOL notices, which is why long-term supply guarantees and drop-in libraries matter for 7-15 year products.
Related (WorkBuddy: link to real pages)
- Compatible replacements: /landings/compatible-lcd-replacements
- Mitsubishi replacement guide: /blog/mitsubishi-lcd-replacement
- All models: /products · Quote: /contact
*By Charlie Lu, Co-founder of RONEN Display · RONGEN DISPLAY TECHNOLOGY LIMITED · sales@odmlcd.com*
Need a display recommendation? Send your size, resolution, interface and quantity — engineers reply once the project scope is confirmed with matching standard modules. Request a quote →