DISEA LCD Part Number Cross-Reference: Find the Current RONEN Model
Quick answer
The display modules that buyers originally purchased under the DISEA brand are produced by the same factory and the same engineering team that today supplies the RONEN brand (RONGEN DISPLAY TECHNOLOGY LIMITED, Zhaoqing, Guangdong). The part numbers carried over almost unchanged: the prefix changes from DS- to RG-, and the suffix stays identical. Example: DS-T101BAHA-01 is today's RG-T101BAHA-01. Below is the cross-reference table for the most requested numbers. If yours is not listed, send the full part number to sales@odmlcd.com and we return the matched datasheet within 24 hours.
Why buyers still search DISEA part numbers
Displays specified years ago under the DISEA name are still running inside industrial HMIs, medical devices, instruments and control panels all over the world. When maintenance teams need a service replacement, they search the part number printed on the original label — the DS- number — not the current brand. That is exactly what this page solves: map the old number to the current model, confirm the specification, and get a sample on its way.
DISEA to RONEN cross-reference table
These are the numbers we are asked about most often. Every specification below is taken from the current product page of the RG model — open the link for the full datasheet, outline drawing and PDF download.
| Old number (DS-) | Current model (RG-) | Size / Resolution | Interface | Touch |
|---|---|---|---|---|
| DS-T009HESA-01 | RG-T009HESA-01 | 0.96" · 80×160 · IPS | SPI | Without touch |
| DS-T021BCSA-02 | RG-T021BCSA-02 | 2.1" round · 480×480 · IPS | RGB 24bit 40PIN | Without touch |
| DS-T101BAHA-01 | RG-T101BAHA-01 | 10.1" · 1024×600 · IPS | LVDS 6/8bit 40PIN | Without touch |
| DS-T101BAHA-02CP | RG-T101BAHA-02CP | 10.1" · 1024×600 · IPS | LVDS 6/8bit 40PIN | Capacitive touch (CTP) |
| DS-T101HIEWA-01 | RG-T101HIEWA-01 | 10.1" · 1280×800 · IPS · 1000 cd/m² | LVDS 6/8bit 40PIN | Without touch |
How the part-number scheme works
The numbering logic is simple and consistent:
- Prefix = brand era. Modules sold under the old brand carry the DS- prefix. The same panels in the current catalog carry the RG- prefix.
- Suffix = the panel itself. The suffix stays identical, because the outline, connector, resolution and driver remain the same panel. DS-T021BCSA-02 and RG-T021BCSA-02 refer to the same 2.1-inch round module.
- Variant letters = configuration. For example, the CP ending marks a capacitive touch panel (CTP) — RG-T101BAHA-02CP is the touch version of RG-T101BAHA-01's base design. Each product page lists the exact touch configuration of that variant.
Don't see your number? Three steps
1. Send the complete old part number — plus a photo of the connector or the label if you have it — to sales@odmlcd.com or via WhatsApp.
2. We match it by outline dimensions, connector, resolution and interface, and return the current datasheet with the RG number within 24 hours.
3. You verify the sample on your board before committing. Low MOQ applies, and long-term supply is part of the stock program for service demand.
What about other legacy brands?
The same matching service covers discontinued panels from other industrial brands. If your end-of-life module is a Mitsubishi panel, see our dedicated guide: Mitsubishi LCD Display Replacement. For a general method of qualifying a substitute panel, read Discontinued LCD Drop-in Replacement. The full in-stock catalog of 193 models is on All Models.
FAQ
Are DISEA and RONEN the same company?
Yes — it is the same factory and the same engineering team. The product line formerly sold under the DISEA brand is now supplied under the RONEN brand by RONGEN DISPLAY TECHNOLOGY LIMITED, with the same production base in Zhaoqing, Guangdong.
How do I convert an old DISEA part number to the current one?
Keep the suffix, change the prefix: DS- becomes RG-. Example: DS-T101BAHA-01 corresponds to RG-T101BAHA-01. If your suffix is not listed in the table above, send the full part number and we will match it for you.
What does the CP suffix mean on these modules?
CP marks units fitted with a capacitive touch panel (CTP). The same base model without the CP suffix ships without touch. Each product page lists the exact touch configuration of that variant.
Can I still buy the display I purchased years ago under the old brand?
Yes. Identify the matching RG model from the cross-reference table, or send us the old part number — we return the matched current datasheet and arrange a sample. Low MOQ applies.
Related pages
- Full catalog: /all-lcd-list · Products overview: /products
- Mitsubishi replacement guide: /blog/mitsubishi-lcd-replacement
- Drop-in replacement method: /blog/discontinued-lcd-drop-in-replacement
- Get a quote: /contact
*By Charlie Lu, Founder of RONEN Display · RONGEN DISPLAY TECHNOLOGY LIMITED · sales@odmlcd.com · WhatsApp (WhatsApp: click-to-reveal on odmlcd.com)*
Have an old part number in hand? Send it as-is — we map it to the current model and reply within 24 hours with the datasheet and sample path. Send the P/N →