G121XTN02.0 Alternative Source — Engineering Cross-Reference
Looking for an alternative source or second source for G121XTN02.0? This page documents
the published AU Optronics (AUO) module parameters and the RONEN engineering route for evaluating an
ODM/OEM supply. Final fit is confirmed per project.
G121XTN02.0 alternative source — parameter comparison
The table shows the published AU Optronics (AUO) module parameters alongside the RONEN ODM/OEM module with the same display size and resolution. Fields that depend on the original manufacturer's datasheet are referred to that document rather than restated as a value we have not issued.
| Parameter | AU Optronics (AUO) standard module | RONEN ODM/OEM alternative |
|---|---|---|
| Part number | G121XTN02.0 | RG-T121QXHA-01 |
| Display size | 12.1寸 | 12.1 inch |
| Resolution | 1024x768 | 1024x768 |
| Luminance | 1000nits | 1000 cd/m² |
| Operating temperature | -30 ~ 85°C | -20 ~ 70 |
| Interface | Refer to original datasheet | 6/8 BIT LVDS |
| Active area | Refer to original datasheet | 245.76x184.32 |
| Outline | Refer to original datasheet | 260.50x204.00x7.11 |
| Panel mode | Original specification | IPS |
| Driver IC | Refer to original datasheet | |
| Touch | Original specification; touch is a project option on the RONEN side | Without touch / capacitive or resistive available per project |
What we check before recommending RG-T121QXHA-01
For a 12.1″ 1024x768 module, the evaluation covers the active area, interface family, luminance, panel mode and mechanical outline. Connector pin assignment, backlight drive conditions and timing are reviewed against your existing design by RONEN engineering. Capacitive or resistive touch can be specified as part of the ODM/OEM build.
Other AU Optronics (AUO) part numbers mapped to this size class are listed in the AU Optronics (AUO) cross-reference index, or use the alternative source finder to search by part number.
Request a cross-reference review
Send the original part number G121XTN02.0, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms the recommended module before any order is placed.
Contact RONEN engineering → · View RG-T121QXHA-01 specifications →
This is a documented engineering cross-reference. Interchangeability is not asserted. Final fit is confirmed per project.