TM065QDGP03-00 Engineering Cross-Reference — Engineering Cross-Reference

2026-11-11 · RONEN Display Engineering
RONEN has not published an engineering cross-reference for TM065QDGP03-00. Send the original part number and datasheet for an ODM/OEM engineering evaluation; we map the display envelope against our catalog and respond with a recommended configuration.

TM065QDGP03-00 — published parameters

The parameters below are taken from the Tianma standard module data we collected. They are shown for identification only; RONEN is not an authorised Tianma distributor and does not present these modules as original Tianma products.

ParameterTianma standard module
Part numberTM065QDGP03-00
Display size6.5 inch
Resolution640x480
Active area132.48x99.36 mm
InterfaceLVDS (1 ch, 6/8-bit), 20 pins
Luminance800 cd/m²
TouchRefer to original datasheet

RONEN catalog modules for engineering evaluation

The following catalog modules are the closest by size and resolution. They are listed for evaluation only and are not a published cross-reference for TM065QDGP03-00. A cross-reference is issued only after RONEN engineering reviews the original datasheet, the interface you drive and the mechanical envelope.

RONEN catalog moduleSizeResolutionInterfaceLuminance
RG-T057BGEA-01DE5.7 inch640x480RGB 18bit 40PIN DE Mode500 cd/m²
RG-T057BGEA-01PDE5.7 inch640x480RGB 18bit 40PIN DE Mode420 cd/m²
RG-T0565BGEA-01DE5.65 inch640x480RGB 24bit 50PIN DE Mode270 cd/m²
RG-T0565BGEA-02DE5.65 inch640x48024BIT RGB750 cd/m²

Request an ODM/OEM engineering evaluation

Send TM065QDGP03-00 with your interface requirement, target mechanical envelope and project quantity. We confirm the electrical and mechanical fit before any recommendation is issued.

Send TM065QDGP03-00 for engineering evaluation → · Full Tianma part-number index → · Alternative source finder →

Final fit is confirmed per project. No unconditional interchangeability commitment is made for this part number.

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.