Tianma LCD Alternative Source — Engineering Cross-Reference
Tianma supplies standard LCD modules. RONEN supplies ODM/OEM alternatives for the same display envelope. Where size, resolution, active area, interface family and luminance line up, the RONEN module can enter an engineering evaluation for that project.
Documented Tianma cross-references (20 part numbers)
Each row below maps a Tianma standard module part number to the RONEN module whose published specifications have been checked side by side. Select the RONEN part number for the full specification table, or enter the Tianma part number in the alternative source finder.
| Tianma part number | Size | Resolution | Tianma interface | RONEN alternative | RONEN interface |
|---|---|---|---|---|---|
TM043NDH02-40 | 4.3″ | 480x272 | RGB | RG-T043BPI-01ND | RGB 24bit 40PIN |
TM050RDH03-41 | 5″ | 800x480 | Parallel RGB (1 ch, 8-bit), 40 pins FPC | RG-T050BWEF-01 | 24BIT RGB |
TM070JDHG30-00 | 7″ | 1280x800 | LVDS (1 ch, 8-bit), 40 pins | RG-T070TISA-01 | LVDS 40 Pin |
TM070RBH10-41 | 7″ | 800x480 | Parallel RGB (1 ch, 6/8-bit), 50 pins FPC | RG-T070BWE-14ND | RGB 24bit 50PIN Short FPC |
TM070RDH10-40 | 7″ | 800x480 | Parallel RGB (1 ch, 6/8-bit), 50 pins FPC | RG-T070QWHW-01 | RGB 24bit 50PIN Long FPC |
TM070RDH10-43 | 7″ | 800x480 | Parallel RGB (1 ch, 6/8-bit), 50 pins FPC | RG-T070BWE-14ND | RGB 24bit 50PIN Short FPC |
TM070RDH13-40 | 7″ | 800x480 | RGB 24-bit with TCON, 50 pins FPC | RG-T070BWE-14ND | RGB 24bit 50PIN Short FPC |
TM070RDHG34-00 | 7″ | 800x480 | Parallel RGB (1 ch, 8-bit), 50 pins FPC | RG-T070QWHW-02 | RGB 24bit 50PIN Long FPC |
TM070RDSG12-00 | 7″ | 800x480 | LVDS | RG-T070SWHWA-02 | LVDS 6/8bit 20PIN |
TM101DDHG01-72 | 10.1″ | 1024x600 | LVDS (1 ch, 6/8-bit) 40 pins | RG-T101BAH-01 | LVDS 6/8bit 40PIN |
TM101JDHG30-00 | 10.1″ | 1280x800 | LVDS (1 ch, 6/8-bit) 40 pins | RG-T101HIEWA-04 | LVDS 6/8bit 40PIN |
TM101JDHP01-00 | 10.1″ | 1280x800 | LVDS (1 ch, 8-bit) 40 pins | RG-T101BIHA-01 | 8BIT LVDS 40PIN |
TM101JDHP03-00 | 10.1″ | 1280x800 | LVDS (1 ch, 6/8-bit) 40 pins | RG-T101BIHA-01 | 8BIT LVDS 40PIN |
TM101JVHG30-05 | 10.1″ | 1280x800 | LVDS (1 ch, 6/8-bit) 40 pins | RG-T101BIHA-01 | 8BIT LVDS 40PIN |
TM104SDHG30-02 | 10.4″ | 800x600 | Parallel RGB (1 ch, 6/8-bit) 60 pins FPC | RG-T104QGH-02 | RGB 24bit 60PIN |
TM104SDHG30-71 | 10.4″ | 800x600 | Parallel RGB / TTL (1 ch, 6/8-bit) 60 pins FPC | RG-T104QGH-02 | RGB 24bit 60PIN |
TM121JDGP30-00 | 12.1″ | 1280x800 | LVDS | RG-T121QIHA-01 | LVDS 6/8 BIT |
TM121JDSG10-01 | 12.1″ | 1280x800 | LVDS | RG-T121QIHA-01 | LVDS 6/8 BIT |
TM121TDGP01-01 | 12.1″ | 1024x768 | LVDS | RG-T121QXHA-01 | 6/8 BIT LVDS |
TM121TDGP03-00 | 12.1″ | 1024x768 | LVDS | RG-T121QXHA-02 | LVDS 6/8bit 30PIN |
Full Tianma part-number index (53 standard modules)
Every Tianma standard module we evaluated has its own page. A published cross-reference means the RONEN module parameters were checked side by side; an engineering candidate lists the parameter differences that need project-level confirmation; where no cross-reference is published, the page explains how to request an ODM/OEM engineering evaluation.
| Tianma part number | Size | Resolution | Tianma interface | Cross-reference status | RONEN module |
|---|---|---|---|---|---|
TM024HDHP49-00 | 2.4″ | 240x320 | CPU 8-bit/SPI | Engineering candidate — final fit confirmed per project | RG-T024BQSA-01 |
TM035KDGP01-00 | 3.5″ | 320x240 | Parallel RGB (1 ch, 8-bit) + SPI, 54 pins FPC | Engineering candidate — final fit confirmed per project | RG-T035HLS-01 |
TM035KDGP01-02 | 0″ | No published cross-reference — ODM evaluation | — | ||
TM035KDH03-79 | 3.5″ | 320x240 | Digital RGB (8/24-bit) + SPI, CCIR601/656, 54 pins FPC | Engineering candidate — final fit confirmed per project | RG-T035GLH-01 |
TM035PDHG03-00 | 3.5″ | 320x480 | RGB | Engineering candidate — final fit confirmed per project | RG-T035BHSA-01 |
TM043NDH02-40 | 4.3″ | 480x272 | RGB | Published cross-reference | RG-T043BPI-01ND |
TM050RDH03-41 | 5″ | 800x480 | Parallel RGB (1 ch, 8-bit), 40 pins FPC | Published cross-reference | RG-T050BWEF-01 |
TM057QDH01-41 | 5.7″ | 640x480 | Parallel RGB (1 ch, 6-bit), 33 pins | Engineering candidate — final fit confirmed per project | RG-T0565BGEA-03DE |
TM065QDGP03-00 | 6.5″ | 640x480 | LVDS (1 ch, 6/8-bit), 20 pins | No published cross-reference — ODM evaluation | — |
TM070DDHG03-40 | 7″ | 1024x600 | LVDS (1 ch, 6/8-bit), 40 pins FPC | Engineering candidate — final fit confirmed per project | RG-T070MAIA-01 |
TM070JDHG30-00 | 7″ | 1280x800 | LVDS (1 ch, 8-bit), 40 pins | Published cross-reference | RG-T070TISA-01 |
TM070RBH10-41 | 7″ | 800x480 | Parallel RGB (1 ch, 6/8-bit), 50 pins FPC | Published cross-reference | RG-T070BWE-14ND |
TM070RDGP04-00 | 7″ | 800x480 | LVDS (1 ch, 6/8-bit), 20 pins | Engineering candidate — final fit confirmed per project | RG-T070SWHWA-01 |
TM070RDH10-40 | 7″ | 800x480 | Parallel RGB (1 ch, 6/8-bit), 50 pins FPC | Published cross-reference | RG-T070QWHW-01 |
TM070RDH10-43 | 7″ | 800x480 | Parallel RGB (1 ch, 6/8-bit), 50 pins FPC | Published cross-reference | RG-T070BWE-14ND |
TM070RDH13-40 | 7″ | 800x480 | RGB 24-bit with TCON, 50 pins FPC | Published cross-reference | RG-T070BWE-14ND |
TM070RDHG34-00 | 7″ | 800x480 | Parallel RGB (1 ch, 8-bit), 50 pins FPC | Published cross-reference | RG-T070QWHW-02 |
TM070RDHG34-01 | 0″ | No published cross-reference — ODM evaluation | — | ||
TM070RDSG12-00 | 7″ | 800x480 | LVDS | Published cross-reference | RG-T070SWHWA-02 |
TM080SDH01-41 | 8″ | 800x600 | Parallel RGB (1 ch, 6/8-bit) 50 pins FPC | Engineering candidate — final fit confirmed per project | RG-T080QGH-03 |
TM080TDGP01-00 | 8″ | 1024x768 | LVDS (1 ch, 8-bit) 40 pins (SELB 6/8bit可选) | Engineering candidate — final fit confirmed per project | RG-T080BXEA-01CP |
TM080TDHG01-42 | 8″ | 1024x768 | LVDS (1 ch, 6/8-bit) 40 pins FPC | Engineering candidate — final fit confirmed per project | RG-T080BXEWA-01 |
TM084SDHG01-02 | 8.4″ | 800x600 | LVDS (1 ch, 6/8-bit) 20 pins | Engineering candidate — final fit confirmed per project | RG-T084BXJWA-01 |
TM084SDHG02-01 | 8.4″ | 800x600 | Parallel RGB (1 ch, 6/8-bit) 60 pins FPC | Engineering candidate — final fit confirmed per project | RG-T084BXJWA-01 |
TM084TDGP01-00 | 8.4″ | 1024x768 | LVDS (1 ch, 6/8-bit) 20 pins Connector | Engineering candidate — final fit confirmed per project | RG-T084BXJWA-01 |
TM084TDGP02-00 | 8.4″ | 1024x768 | LVDS (1 ch, 6/8-bit) 20 pins Connector | Engineering candidate — final fit confirmed per project | RG-T084BXJWA-01 |
TM097TDHG04-66 | 9.7″ | 1024x768 | LVDS (1 ch, 6-bit) 30 pins | No published cross-reference — ODM evaluation | — |
TM101DDHG01-72 | 10.1″ | 1024x600 | LVDS (1 ch, 6/8-bit) 40 pins | Published cross-reference | RG-T101BAH-01 |
TM101JDHG30-00 | 10.1″ | 1280x800 | LVDS (1 ch, 6/8-bit) 40 pins | Published cross-reference | RG-T101HIEWA-04 |
TM101JDHP01-00 | 10.1″ | 1280x800 | LVDS (1 ch, 8-bit) 40 pins | Published cross-reference | RG-T101BIHA-01 |
TM101JDHP03-00 | 10.1″ | 1280x800 | LVDS (1 ch, 6/8-bit) 40 pins | Published cross-reference | RG-T101BIHA-01 |
TM101JVHG30-05 | 10.1″ | 1280x800 | LVDS (1 ch, 6/8-bit) 40 pins | Published cross-reference | RG-T101BIHA-01 |
TM104SDGP01-00 | 0″ | No published cross-reference — ODM evaluation | — | ||
TM104SDGP01-01 | 0″ | No published cross-reference — ODM evaluation | — | ||
TM104SDHG30-02 | 10.4″ | 800x600 | Parallel RGB (1 ch, 6/8-bit) 60 pins FPC | Published cross-reference | RG-T104QGH-02 |
TM104SDHG30-71 | 10.4″ | 800x600 | Parallel RGB / TTL (1 ch, 6/8-bit) 60 pins FPC | Published cross-reference | RG-T104QGH-02 |
TM104TDGP10-00 | 10.4″ | 1024x768 | LVDS | Engineering candidate — final fit confirmed per project | RG-T104QXHA-03 |
TM104TDGP13-00 | 10.4″ | 1024x768 | LVDS | Engineering candidate — final fit confirmed per project | RG-T104QXHA-03 |
TM121JDGP30-00 | 12.1″ | 1280x800 | LVDS | Published cross-reference | RG-T121QIHA-01 |
TM121JDSG10-01 | 12.1″ | 1280x800 | LVDS | Published cross-reference | RG-T121QIHA-01 |
TM121SDGP01-00 | 12.1″ | 800x600 | LVDS | Engineering candidate — final fit confirmed per project | RG-T121QGH-01 |
TM121TDGP01-01 | 12.1″ | 1024x768 | LVDS | Published cross-reference | RG-T121QXHA-01 |
TM121TDGP03-00 | 12.1″ | 1024x768 | LVDS | Published cross-reference | RG-T121QXHA-02 |
TM121TDSG02-70 | 12.1″ | 1024x768 | LVDS | Engineering candidate — final fit confirmed per project | RG-T121QXHA-02 |
TM123XDGP01-00 | 12.3″ | 1920x720 | LVDS | No published cross-reference — ODM evaluation | — |
TM133VDGP01-01 | 13.3″ | 1920x1080 | eDP | Engineering candidate — final fit confirmed per project | RG-T133BFHA-02 |
TM133VDGP02-00 | 13.3″ | 1920x1080 | LVDS | Engineering candidate — final fit confirmed per project | RG-T133BFHA-02 |
TM150TDSG70-73 | 15″ | 1024x768 | LVDS | Engineering candidate — final fit confirmed per project | RG-T150QXHA-01 |
TM150TDSG71-72 | 15″ | 1024x768 | LVDS | Engineering candidate — final fit confirmed per project | RG-T150QXHA-01 |
TM156UDGP03-00 | 15.6″ | 1920x1080 | eDP | Engineering candidate — final fit confirmed per project | RG-T156BFHWA-02 |
TM156VDSG16-00 | 15.6″ | 1920x1080 | eDP | Engineering candidate — final fit confirmed per project | RG-T156BFHWA-02 |
TM156VDSG17-00 | 15.6″ | 1920x1080 | LVDS | Engineering candidate — final fit confirmed per project | RG-T156BFHWA-02 |
TM215UFGP03-00 | 21.5″ | 1920x1080 | LVDS | Engineering candidate — final fit confirmed per project | RG-T215BFHA-02 |
Search any of these part numbers in the alternative source finder.
How a cross-reference is qualified
We compare the parameters that determine whether a display can be evaluated for an existing design: diagonal size, resolution, active area (within 0.35 mm), interface family (LVDS / RGB / MCU-SPI / MIPI), luminance (within 30 percent), and panel mode (TN / IPS). Capacitive or resistive touch is configured per project on the RONEN side and does not block the comparison, because RONEN builds to the project specification rather than shipping a fixed original-module configuration.
What this cross-reference does not claim
Tianma part numbers are shown for identification only. RONEN is not an authorised Tianma distributor and these modules are not presented as original Tianma products. Connector pin assignment, backlight drive conditions, timing and firmware behaviour are reviewed by RONEN engineering per project before a recommendation is issued. This is a documented engineering cross-reference, not an unconditional interchangeability commitment.
From part number to quotation
Send the original part number, the interface you drive, and the mechanical envelope. We map it to a RONEN module, confirm the items that need project-specific verification, and respond with the recommended configuration. Volume, tooling and touch options are discussed as part of that review.
Contact RONEN engineering → · Search by Tianma part number →