TM084SDHG02-01 Engineering Cross-Reference — Engineering Cross-Reference
Looking for an engineering cross-reference for TM084SDHG02-01? The RONEN module below is
an engineering candidate for this Tianma standard module. Published parameters differ in the
items listed below, so the final fit is confirmed per project.
TM084SDHG02-01 engineering cross-reference — parameter comparison
The table places the published Tianma parameters next to the RONEN catalog module selected for evaluation. A difference in luminance, interface, panel mode or active area does not by itself disqualify a module for an ODM/OEM build; it defines what RONEN engineering verifies against your existing design.
| Parameter | Tianma standard module | RONEN ODM/OEM alternative |
|---|---|---|
| Part number | TM084SDHG02-01 | RG-T084BXJWA-01 |
| Display size | 8.4 inch | 8.4 inch |
| Resolution | 800x600 | 1024x768 |
| Active area | 170.4x127.8 mm | 170.496x127.872 mm |
| Interface | Parallel RGB (1 ch, 6/8-bit) 60 pins FPC | LVDS |
| Luminance | 350 cd/m² | 500 cd/m² |
| Driver IC | Refer to original datasheet | JD9168S |
| Panel mode | Tianma standard module | TN |
| Outline | Refer to original datasheet | 199.5x149.0x9.60 |
| Operating temperature | Refer to original datasheet | -30 ~ 80 |
| Touch | Original specification; touch is a project option on the RONEN side | Without touch / capacitive or resistive available per project |
Parameter differences to review
- Resolution 800x600 vs 1024x768
- Interface RGB vs LVDS
What we check before recommending RG-T084BXJWA-01
For a 8.4″ 800x600 module, the evaluation covers active area, interface family, luminance, panel mode, mechanical outline, connector pin assignment, backlight drive conditions and timing. Capacitive or resistive touch can be specified as part of the ODM/OEM build. This is a documented engineering cross-reference, not an unconditional interchangeability commitment.
Other Tianma part numbers
See the full Tianma part-number index for all 53 standard modules we evaluated, or use the alternative source finder to search by part number.
Request a cross-reference review
Send the original part number TM084SDHG02-01, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms the recommended module before any order is placed.
Contact RONEN engineering → · View RG-T084BXJWA-01 specifications →
This is a documented engineering cross-reference, not an unconditional interchangeability commitment. Final fit is confirmed per project.