ZJ035IA-02K Alternative Source — Engineering Cross-Reference
Looking for an alternative source or second source for ZJ035IA-02K? This page documents
the published Chimei (now Innolux) module parameters and the RONEN engineering route for evaluating an
ODM/OEM supply. Final fit is confirmed per project.
ZJ035IA-02K alternative source — parameter comparison
The table shows the published Chimei (now Innolux) module parameters alongside the RONEN ODM/OEM module with the same display size and resolution. Fields that depend on the original manufacturer's datasheet are referred to that document rather than restated as a value we have not issued.
| Parameter | Chimei (now Innolux) standard module | RONEN ODM/OEM alternative |
|---|---|---|
| Part number | ZJ035IA-02K | RG-T035BHSA-01 |
| Display size | 3.5寸 | 3.5 inch |
| Resolution | 320x480 | 320x480 |
| Luminance | 320cd/m2 | 320 cd/m² |
| Operating temperature | -20-70 (℃) | -20 ~ 70 |
| Interface | Refer to original datasheet | RGB/MCU/SPI 50PIN |
| Active area | Refer to original datasheet | 48.96x73.44 |
| Outline | Refer to original datasheet | 54.48x84.71x2.20 |
| Panel mode | Original specification | IPS |
| Driver IC | Refer to original datasheet | ST7365P |
| Touch | Original specification; touch is a project option on the RONEN side | Without touch / capacitive or resistive available per project |
What we check before recommending RG-T035BHSA-01
For a 3.5″ 320x480 module, the evaluation covers the active area, interface family, luminance, panel mode and mechanical outline. Connector pin assignment, backlight drive conditions and timing are reviewed against your existing design by RONEN engineering. Capacitive or resistive touch can be specified as part of the ODM/OEM build.
Other Chimei (now Innolux) part numbers mapped to this size class are listed in the Chimei (now Innolux) cross-reference index, or use the alternative source finder to search by part number.
Request a cross-reference review
Send the original part number ZJ035IA-02K, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms the recommended module before any order is placed.
Contact RONEN engineering → · View RG-T035BHSA-01 specifications →
This is a documented engineering cross-reference. Interchangeability is not asserted. Final fit is confirmed per project.