RG-T0916FH-B40M — 9.16″ 462x1920 Bar TFT LCD Module
Stretched bar-format module for tall vertical strips, machine-side status boards, column-mounted information displays.
2D CAD mechanical drawing: request it by email
| Display Size | 9.16 inch |
|---|---|
| Resolution | 462x1920 |
| LCD Type / Shape | Bar |
| Luminance | 400 cd/m² |
| Module Interface | MIPI |
| LCD Driver IC | FL7707 |
| Touch Option | Without touch |
| Active Area (mm) | 54.442x226.253 |
| Outline Dim. (mm) | 60.94x240.16x4.50 |
| Operating Temp. (°C) | -20-70 |
| Storage Temp. (°C) | -30-80 |
Can’t find the exact model you need?
This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.
Technical overview — what these specifications mean for your design
The table above lists the factory parameters of this module. The notes below explain how each value affects an actual enclosure, firmware and end-product decision, so you can judge fit before requesting a quote.
Panel, resolution and form factor
The panel uses Bar; the native resolution is 462x1920 at a 9.16 inch diagonal.
Active area 54.442x226.253 mm sits inside an outline of 60.94x240.16x4.50 mm — the difference is the bezel, driver area and connector allowance your mechanical drawing must reserve.
The longest active area of the group — 226.25 mm vertical at 9.16 inch diagonal, built for genuinely tall, narrow mounting slots rather than a shallow instrument strip.
Backlight brightness and viewing conditions
Typical luminance is 400 cd/m². That suits indoor products with normal ambient light and semi-outdoor enclosures that avoid direct sun.
Viewing angles are All view (85/85/85/85 typ., CR ≥ 10), which keeps colours and viewing angles stable when the panel is read off-axis — useful where the screen is not directly facing the user, such as an angled instrument panel or a panel mounted at a slight tilt in a console.
Interface and display driver IC
The module is driven over MIPI. MIPI is a serial display interface: it needs far fewer PCB traces and pins than a parallel RGB bus while still carrying enough bandwidth for this resolution, which matters when the board space around the panel is tight.
Display driver IC: FL7707. Knowing the driver lets your firmware team pull the correct initialisation sequence and timing parameters — this is the usual starting point when bringing up a new panel.
Touch capability
This configuration is without touch — display only. That suits products where input comes from buttons, a rotary encoder, a keypad or a remote control, and it keeps the module thinner, lower-cost and free of touch-panel calibration work. If your product needs on-screen interaction, ask for the capacitive-touch variant.
Environmental range and storage
Operating temperature is -20 ~ 70 °C — the panel must be within this range during operation. Specify enclosure ventilation and consider thermal rise from electronics inside the housing, because internal temperature can exceed ambient.
Storage range is -30 ~ 80 °C, which matters for shipping, warehousing and unpowered periods — particularly relevant for products shipped through hot climates or stored in containers.
Integration and ordering notes
Every model in this series is held in permanent stock, so samples and production volumes ship from the same bin and the specification does not change between them. Stock items typically ship within 24–48 hours; order quantities and OEM/volume pricing are confirmed per project.
If your project needs something the standard configuration does not cover — a different interface, touch type, brightness range, backlight life or outline dimension — it is worth asking for a custom quotation. Adjusting an interface or outline within an existing family is usually far cheaper and faster than starting a new module from scratch, and the factory-direct route means you deal with the manufacturer rather than a trading company.
Request a quote & specification
Full spec sheet, pricing and lead time for this model — factory-direct, no middleman.
- Standard stockStandard models ready to ship — OEM & distributor supply programs
- Custom optionInterface / touch / brightness / outline tailored
- Lead timeStock items: 24–48h · Custom: 5–8 weeks
- Warranty12 months against DOA, 5+ year supply continuity
Frequently asked questions about RG-T0916FH-B40M
What are the order quantities and stock for RG-T0916FH-B40M?
RG-T0916FH-B40M is a standard RONEN module held permanently in stock in Guangdong, so samples and production volumes ship from the same bin with no specification change between them. Order quantities and OEM/volume pricing are confirmed per project — contact sales@odmlcd.com to discuss a supply agreement.
Can RG-T0916FH-B40M be customized?
Yes. Interface, backlight brightness, touch option (resistive or capacitive), cover glass and outline dimension can all be adjusted within this product family. Ask our team for the minimum quantity of your option.
How long will RG-T0916FH-B40M stay in supply?
RG-T0916FH-B40M is covered by RONEN's long-term supply commitment: 5+ years of continuous supply as standard, and a pin-compatible successor is proposed if the panel is ever revised.
What is the operating temperature range of RG-T0916FH-B40M?
Operating temperature is -20 ~ 70 °C and storage temperature is -30 ~ 80 °C. Specify enclosure ventilation and account for internal thermal rise from the electronics inside the housing.
How do I get the specification and a test sample?
Submit the RFQ form on this page — you receive the specification sheet, pricing and engineering support within one business day.