Reliability & Harsh Environment
Wide-temperature qualification, humidity, vibration, ESD/EMI and temperature derating. The following guides are written by our application engineers and backed by real module data.
ESD & EMI Protection for Industrial TFT Displays
How to harden industrial TFT LCD modules against ESD and EMI: TVS diode selection, FPC grounding, shielding, layout, and survivability specs.
2026-10-16 · Reliability & Harsh Environment
Designing Displays for Harsh Environments: When Sunlight, Temperature, Vibration and Condensation Act Together
Why single-factor testing misleads, and how to design industrial displays for sunlight, temperature, vibration and condensation together.
2026-10-16 · Reliability & Harsh Environment
EN 50155 Display Surge: Fixing One Rail Fault
One rail display fault traced to system-level EN 50155 surge and EFT pulses.
2024-01-13 · Reliability & Harsh Environment
Display Condensation Prevention: Stopping Fogging Inside LCD Enclosures
Why fog forms inside sealed LCD enclosures, how to stop it with sealing, desiccant, membranes and optical bonding, plus a checklist for humid sites.
2026-10-16 · Reliability & Harsh Environment
Fix LCD Condensation: Humid-Heat Fog & Backlight Ingress
Root causes of humidity test display fog, backlight water ingress corrosion, and LCD condensation. Engineering fixes: sealing, membranes, desiccant, bonding.
2025-08-22 · Reliability & Harsh Environment
LCD Fails Cold/Hot Cycle Test: Root Causes & Fixes
Why a display fails during high-low temperature cycling: CTE mismatch, FPC and solder fatigue, condensate. Engineering root-cause path plus design fixes.
2022-10-07 · Reliability & Harsh Environment
TFT Backlight: LED Lifetime, PWM vs Analog Dimming and Brightness Spec
The backlight is what makes a TFT visible, and it has its own failure mode and specification separate from the LCD. What LED lifetime ratings actually mean (to half …
2026-10-11 · Reliability & Harsh Environment
Vibration Test Display Flicker: Fixing Loose Board-to-FPC Connectors
Root-cause guide to vibration test display flicker and black screens: board-to-FPC connector loosening, locking connectors, adhesive, strain relief, and qualificatio…
2023-11-07 · Reliability & Harsh Environment
Wide Temperature LCD Modules: Designing for -30 °C to 85 °C
A standard commercial TFT module is rated 0 °C to 50 °C.
2026-08-08 · Reliability & Harsh Environment
Wide-Temperature LCD Qualification: Cold Start, Thermal Soak and Cycling
How wide-temperature TFT LCD modules are qualified: cold-start ramp, thermal soak, cycling, LC chemistry and backlight limits, and how to specify heaters.
2026-10-16 · Reliability & Harsh Environment