2.69″ Bar LCD Display — 200x648 RGB/SPI/QSPI/MCU Module
Can’t find the exact model you need?
This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.
| Display Size | 2.69 inch (Bar) |
|---|---|
| Resolution | 200x648 |
| Outline Dim. (mm) | Confirmed per project |
| Active Area (mm) | 21x69 |
| Module Interface | RGB/SPI/QSPI/MCU |
| Driver IC | NV3007 |
| Module Type | COG TFT module with backlight |
| Luminance | 300 cd/m² |
| Operating Temperature | -20 ℃ ~ +70 ℃ (standard) |
| Glass Type | Standard TFT glass; cover glass optional |
| Touch Option | Optional — none / resistive / capacitive (CTP) |
| HDMI Driver Board | HDMI converter driver board available as add-on |
| Supply Model | Built to order — custom special-shape programme |
Available formats in this size
| Resolution | Active Area (mm) | Outline (mm) | Brightness | Interface | Driver IC |
|---|---|---|---|---|---|
| 200x648 | 21x69 | — | 300 cd/m² | RGB/SPI/QSPI/MCU | NV3007 |
| 180x640 | 23x82 | — | 300 cd/m² | RGB/SPI/QSPI/MCU | NV3007 |
Technical overview — what these specifications mean for your design
The table above lists the published format of this stretched-bar display. The notes below explain how each value affects an actual enclosure, firmware and end-product decision, so you can judge fit before requesting a quotation.
Panel, resolution and form factor
The 2.69 inch stretched-bar panel runs a native 200x648 pixel format. Because the format is built to order, we match the resolution to the host board you already drive — no frame-buffer rework, no scaling artifacts on a non-standard aspect ratio.
Outline and active area
Outline Confirmed per project with an active area of 21x69 (all mm). The difference between the two is the bezel, driver area and connector allowance your mechanical drawing must reserve — send us your cut-out drawing and we confirm the fit before tooling.
Brightness and viewing conditions
Specified at 300 cd/m². Indoor builds run standard backlights; semi-outdoor and sunlight-readable builds add a high-brightness backlight, cover glass and optional optical bonding for contrast in direct light.
Interface, glass and touch
Electrical interface: RGB/SPI/QSPI/MCU. Glass: standard tft glass; cover glass optional. Touch: optional — none / resistive / capacitive (ctp). An HDMI driver board is available as an add-on — hdmi converter driver board available as add-on — so the module connects straight to HDMI sources without a custom carrier board.
How ordering works
This size ships under the Special Shape Displays build-to-order programme — it is separate from the 197-model standard catalogue. Send size, resolution and outline; you get a datasheet, feasibility review and quotation within one business day. Interface, brightness, touch and outline can all be adjusted per project.
Request specification & quotation
Full spec sheet, feasibility review and pricing for this 2.69 inch Bar display — factory-direct, no middleman.
- Supply modelBuilt to order — datasheet & feasibility per project
- Custom optionOutline / AA / interface / touch / brightness tailored
- Full datasheet on RFQOutline drawing, pin definition, contrast, viewing angle — within 1 business day
- Lead timeConfirmed with quotation · Factory-direct
- Warranty12 months against manufacturing defects, long-term supply commitment
Frequently asked questions about the 2.69 inch Bar display
What resolution is the 2.69 inch Bar display available in?
The 2.69 inch Bar format is built on 200x648. We match the native pixel format so your host controller does not need to change — tell us the resolution and interface your board already drives and we confirm the match on the datasheet.
What are the active area and outline of the 2.69 inch Bar display?
The published active area for the 2.69 inch build is 21x69. Send us the space available in your enclosure and we confirm the mechanical fit, including any FPC routing and bezel allowance.
What interface does the 2.69 inch Bar display use?
RGB/SPI/QSPI/MCU. We confirm the connector, signal timing and backlight driving as part of the released datasheet.
How bright is the 2.69 inch Bar display?
Specified at 300 cd/m². For handheld and portable instruments we balance readability against battery drain and confirm the backlight current in the datasheet.
What glass type and touch option does the 2.69 inch Bar display support?
Standard TFT glass; touch is optional — none / resistive / capacitive (CTP), with or without cover glass. On the 2.69 inch build, the cover glass is typically 0.7–1.1 mm, and resistive touch stays practical where operators work with gloves or a stylus. On a stretched bar we route the touch tail along the long edge and hold the bezel tight on the short axis so the module fits a narrow slot.
Can I get an HDMI driver board for the 2.69 inch Bar display?
Yes. An HDMI to MIPI/LVDS converter driver board is available as an add-on so the module plugs into HDMI sources such as media players, SBCs and industrial PCs. For the 2.69 inch panel, it is handy for bench evaluation and for instruments where a small single-board computer is the video source. For stretched bars the board also carries the non-standard aspect ratio without stretching or letter-boxing the image. We confirm the board match per project.
Is the 2.69 inch Bar display available or built to order?
The 2.69 inch Bar display is built to order. Send us the size, resolution and outline and we return a datasheet, feasibility review and quotation.
Related special-shape formats
Browse other build-to-order shapes: Special Shape Displays (hub) · 3.4" Round sample · 14.5" Bar sample · 4" Square sample