6.18″ Square LCD Display — 1600x1200 MIPI Module
Can’t find the exact model you need?
This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.
| Display Size | 6.18 inch (Square) |
|---|---|
| Resolution | 1600x1200 |
| Outline Dim. (mm) | Confirmed per project |
| Active Area (mm) | 132x99 |
| Module Interface | MIPI |
| Driver IC | JD9365TX |
| Module Type | COG TFT module with backlight |
| Luminance | 500 cd/m² |
| Operating Temperature | -20 ℃ ~ +70 ℃ (standard) |
| Glass Type | Standard TFT glass; cover glass optional |
| Touch Option | Optional — none / resistive / capacitive (CTP) |
| HDMI Driver Board | HDMI converter driver board available as add-on |
| Supply Model | Built to order — custom special-shape programme |
Available formats in this size
| Resolution | Active Area (mm) | Outline (mm) | Brightness | Interface | Driver IC |
|---|---|---|---|---|---|
| 1600x1200 | 132x99 | — | 500 cd/m² | MIPI | JD9365TX |
Technical overview — what these specifications mean for your design
The table above lists the published format of this square display. The notes below explain how each value affects an actual enclosure, firmware and end-product decision, so you can judge fit before requesting a quotation.
Panel, resolution and form factor
The 6.18 inch square panel runs a native 1600x1200 pixel format. Because the format is built to order, we match the resolution to the host board you already drive — no frame-buffer rework, no scaling artifacts on a non-standard aspect ratio.
Outline and active area
Outline Confirmed per project with an active area of 132x99 (all mm). The difference between the two is the bezel, driver area and connector allowance your mechanical drawing must reserve — send us your cut-out drawing and we confirm the fit before tooling.
Brightness and viewing conditions
Specified at 500 cd/m². Indoor builds run standard backlights; semi-outdoor and sunlight-readable builds add a high-brightness backlight, cover glass and optional optical bonding for contrast in direct light.
Interface, glass and touch
Electrical interface: MIPI. Glass: standard tft glass; cover glass optional. Touch: optional — none / resistive / capacitive (ctp). An HDMI driver board is available as an add-on — hdmi converter driver board available as add-on — so the module connects straight to HDMI sources without a custom carrier board.
How ordering works
This size ships under the Special Shape Displays build-to-order programme — it is separate from the 197-model standard catalogue. Send size, resolution and outline; you get a datasheet, feasibility review and quotation within one business day. Interface, brightness, touch and outline can all be adjusted per project.
Request specification & quotation
Full spec sheet, feasibility review and pricing for this 6.18 inch Square display — factory-direct, no middleman.
- Supply modelBuilt to order — datasheet & feasibility per project
- Custom optionOutline / AA / interface / touch / brightness tailored
- Full datasheet on RFQOutline drawing, pin definition, contrast, viewing angle — within 1 business day
- Lead timeConfirmed with quotation · Factory-direct
- Warranty12 months against manufacturing defects, long-term supply commitment
Frequently asked questions about the 6.18 inch Square display
What resolution is the 6.18 inch Square display available in?
The 6.18 inch Square format is built on 1600x1200. We match the native pixel format so your host controller does not need to change — tell us the resolution and interface your board already drives and we confirm the match on the datasheet.
What are the active area and outline of the 6.18 inch Square display?
The published active area for the 6.18 inch build is 132x99. Send us the space available in your enclosure and we confirm the mechanical fit, including any FPC routing and bezel allowance.
What interface does the 6.18 inch Square display use?
MIPI. We confirm the connector, signal timing and backlight driving as part of the released datasheet.
How bright is the 6.18 inch Square display?
Specified at 500 cd/m². At this size both indoor and outdoor versions are common, so tell us the mounting position and we quote the matching backlight.
What glass type and touch option does the 6.18 inch Square display support?
Standard TFT glass; touch is optional — none / resistive / capacitive (CTP), with or without cover glass. On the 6.18 inch build, projected-capacitive (CTP) is the usual choice for finger input, with cover glass around 1.1–2.0 mm that can be printed with your bezel artwork. The square format gives a symmetric sensor with even margins on all four edges, which simplifies bezel design and sensor routing.
Can I get an HDMI driver board for the 6.18 inch Square display?
Yes. An HDMI to MIPI/LVDS converter driver board is available as an add-on so the module plugs into HDMI sources such as media players, SBCs and industrial PCs. For the 6.18 inch panel, it is the usual bridge when an embedded SBC, media player or camera board is the video source. The converter is matched to the square panel's native pixel clock and porch timing. We confirm the board match per project.
Is the 6.18 inch Square display available or built to order?
The 6.18 inch Square display is built to order. Send us the size, resolution and outline and we return a datasheet, feasibility review and quotation.
Related special-shape formats
Browse other build-to-order shapes: Special Shape Displays (hub) · 3.4" Round sample · 14.5" Bar sample · 4" Square sample