RG-T0565BGEA-04DE - 5.65" 640x480 IPS TFT LCD module

RG-T0565BGEA-04DE — 5.65″ 640x480 IPS TFT LCD Module

Industrial-grade display module from RONEN’s 23,700㎡ ISO 9001:2015 factory. Datasheet & samples available on request.
5.65"640x480IPS700 cd/m²Without touch

2D CAD mechanical drawing: request it by email

RONEN P/NRG-T0565BGEA-04DE
Display Size5.65 inch
Resolution640x480
LCD Type / ShapeIPS
Luminance700 cd/m²
Module Interface18BT RGB
LCD Driver ICJD9168S
Touch OptionWithout touch
Active Area (mm)115.20x86.40
Outline Dim. (mm)126.50x100.00x5.70
Operating Temp. (°C)-20 ~ 70
Storage Temp. (°C)-30 ~ 80

Can’t find the exact model you need?

This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.

Technical overview — what these specifications mean for your design

The table above lists the factory parameters of this module. The notes below explain how each value affects an actual enclosure, firmware and end-product decision, so you can judge fit before requesting a quote.

Panel, resolution and form factor

The panel uses IPS; the native resolution is 640x480.

Active area 115.20x86.40 mm sits inside an outline of 126.50x100.00x5.70 mm — the difference is the bezel, driver area and connector allowance your mechanical drawing must reserve.

Backlight brightness and viewing conditions

Typical luminance is 700 cd/m², which is high enough for high-ambient-light use — outdoor kiosks, vehicle-mounted equipment and industrial panels in direct light. Note that rated luminance is measured under specified test conditions; in direct sun, cover glass anti-reflective coating and enclosure venting still influence the perceived brightness.

The panel is IPS, which keeps colours and viewing angles stable when viewed off-axis — useful where the screen is not directly facing the user, such as angled panels, handheld instruments or equipment mounted at a slight tilt.

MCU interface and display driver IC

The module is driven over 18BT RGB. This is the electrical interface between your MCU and the panel, and it determines two things: how many pins and how much board area your PCB needs, and how fast the screen can be refreshed.

A parallel RGB interface needs more pins and trace count but delivers high throughput, which is appropriate when you need fast frame updates or video.

Display driver IC: JD9168S. Knowing the driver lets your firmware team pull the correct initialisation sequence and timing parameters — this is the usual starting point when bringing up a new panel.

Touch capability

This configuration is without touch — display only. That suits products where input comes from buttons, a rotary encoder, a keypad or a remote control, and it keeps the module thinner, lower-cost and free of touch-panel calibration work. If your product needs on-screen interaction, ask for the capacitive-touch variant of this size.

Environmental range and storage

Operating temperature is -20 °C to 70 °C — the panel must be within this range during operation. Specify enclosure ventilation and consider thermal rise from electronics inside the housing, because internal temperature can exceed ambient.

Storage range is -30 °C to 80 °C, which matters for shipping, warehousing and unpowered periods — particularly relevant for products shipped through hot climates or stored in containers.

Integration and ordering notes

Every model in this series is held in our standard program, so samples and production volumes ship from the same bin and the specification does not change between them. Lead times, order quantities and commercial terms are confirmed in writing per project.

If your project needs something the standard configuration does not cover — a different interface, touch type, brightness range, backlight life or outline dimension — it is worth asking for a custom quotation. Adjusting an interface or outline within an existing family is usually far cheaper and faster than starting a new module from scratch, and the factory-direct route means you deal with the manufacturer rather than a trading company.

⚲ Compare this moduleOpen the spec comparator with this module pre-loaded — line it up against another part side by side.

Replaces legacy OEM panel

This module is a pin-compatible replacement for legacy OEM panels still found in installed equipment:

Send us the original part number and interface, and our engineering team will confirm pinout and backlight compatibility before you order.

Request a quote & datasheet

Full spec sheet, pricing and lead time for this model — factory-direct, no middleman.

  • Supply modelBuilt to order — datasheet & feasibility per project
  • Custom optionOutline / AA / interface / touch / brightness tailored
  • Full datasheet on RFQOutline drawing, pin definition, contrast, viewing angle — per the agreed project plan
  • Lead timeConfirmed with quotation · Factory-direct
  • Warranty12 months against manufacturing defects, long-term supply commitment
Request datasheet (PDF)

Get a quote

We reply once the project scope is confirmed.

Frequently asked questions about RG-T0565BGEA-04DE

How are order quantities and supply terms set for RG-T0565BGEA-04DE?

RG-T0565BGEA-04DE is a standard RONEN module in our standard program, so samples and production volumes ship from the same bin with no specification change between them. Order quantities and commercial terms are confirmed in writing per project — contact sales@odmlcd.com to discuss a supply agreement.

How are supply and delivery schedules confirmed for RG-T0565BGEA-04DE?

Yes. Sample and production schedules, quantities and commercial terms are confirmed in writing per project. Please contact sales@odmlcd.com for a written confirmation.

Can RG-T0565BGEA-04DE be customized?

Yes. FPC outline, connector, backlight brightness, touch panel (resistive or capacitive) and driver-board interface can all be customized. Ask our team for the minimum quantity of your option.

How long will RG-T0565BGEA-04DE stay in supply?

RG-T0565BGEA-04DE is covered by RONEN's long-term supply commitment: 5+ years of continuous supply as standard, and a pin-compatible successor is proposed if the panel is ever revised.

How do I get the datasheet and a test sample?

Submit the RFQ form on this page — you will receive the specification sheet (PDF) and engineering support, with commercial terms confirmed in writing per project.

Similar Modules in 5 – 8 inch

RG-T0565BGEA-01DE - 5.65" 640x480 IPS TFT LCD module

RG-T0565BGEA-01DE

5.65"640x480IPS
RG-T0565BGEA-03DE - 5.65" 640x480 IPS TFT LCD module

RG-T0565BGEA-03DE

5.65"640x480IPS
RG-T0565BGEA-02DE - 5.65" 640x480 IPS TFT LCD module

RG-T0565BGEA-02DE

5.65"640x480IPS
RG-T057BGEA-01DE - 5.7" 640x480 IPS TFT LCD module

RG-T057BGEA-01DE

5.7"640x480IPS