Pinout Adapter Mapper
Pick a source and target LCD connector, edit the pin numbers to match your panel datasheet, and get a signal-by-signal cross-reference with a missing / extra pin check.
Built-in pins are a starting template for common standards: 40-pin RGB TTL (24-bit), 30-pin LVDS single channel / dual channel. Actual pins vary by panel model — edit the pin numbers against the original datasheet before use. Red = signal missing on target (incompatible); orange = present on target but not provided by source.
FAQ
Where do the preset pins come from?
The presets are common starting points for 40-pin RGB TTL and 30-pin LVDS connectors. They are not a substitute for your panel datasheet — always confirm the exact pin assignment before wiring or ordering an adapter board.
What do the red and orange marks mean?
Red means a signal present on the source is missing on the target connector, so a direct mapping is not possible. Orange means the target exposes a signal the source does not provide. Both flag a compatibility gap that needs an adapter or a different panel.
Can I map a custom connector?
Yes. Pick the closest preset, then edit every pin number in the table to match your datasheet. The cross-reference recomputes from your edited values, so it reflects your real connector rather than the template.
Send both connector pinouts and an application engineer returns a verified adapter schematic and a quote within 24 hours.
Talk to RONEN →