>
Drop-in Replacement

5-inch & 5.65-inch TFT LCD Replacement Guide

2026-10-12 · 6 min read

Quick Answer (GEO extract block)

Looking for a 5-inch & 5.65-inch replacement? We stock standard modules across the common 5-inch & 5.65-inch resolutions and interfaces. Match size, resolution and interface first, then verify pinout, timing and backlight — tables below are live catalog parts.

The 5-inch & 5.65-inch replacement landscape

480x272 for cost-driven HMIs, 640x480 (5.0 and 5.65 inch) for legacy instrumentation — including DE-mode variants that matter for older boards. All parts below are standard catalog modules — no tooling, no NRE, sample-first qualification.

Standard modules by group

5.0-inch 480x272 RGB (RGB interface)

RONEN P/NSizeResolutionTypeInterfaceDriver ICLuminance
RG-T050BPH-015.0"480x272TNRGB 24bit 40PINHX8257A400 cd/m²
RG-T050BPH-01P5.0"480x272TNRGB 24bit 40PINHX8257A300 cd/m²
RG-T050BPH-14P5.0"480x272TNRGB 24bit 40PINHX8257A300 cd/m²
RG-T050BPSA-015.0"480x272IPSRGB 24bit 40PINST7282A400 cd/m²

4 matching modules in this group; the table shows representative parts. Contact us for the full list.

5.0-inch 640x480 RGB (RGB interface)

RONEN P/NSizeResolutionTypeInterfaceDriver ICLuminance
RG-T050QGH-015.0"640x480TNRGB 24bit 50PIN TBD.300 cd/m²
RG-T050QGH-025.0"640x480TN24BIT RGB800 cd/m²

2 matching modules in this group; the table shows representative parts. Contact us for the full list.

5.65-inch 640x480 RGB (RGB interface, DE mode)

RONEN P/NSizeResolutionTypeInterfaceDriver ICLuminance
RG-T0565BGEA-01DE5.65"640x480IPSRGB 24bit 50PIN DE ModeJD9168S270 cd/m²
RG-T0565BGEA-02DE5.65"640x480IPS24BIT RGBJD9168S750 cd/m²
RG-T0565BGEA-03DE5.65"640x480IPSRGB 18bit 40PIN DE ModeJD9168S350 cd/m²
RG-T0565BGEA-04DE5.65"640x480IPS18BT RGBJD9168S700 cd/m²

4 matching modules in this group; the table shows representative parts. Contact us for the full list.

The 640x480 trap: two sizes, one resolution

640x480 exists in our catalog at both 5.0 inches (2 modules) and 5.65 inches (4 modules). Resolution alone does not pick the part — outline, connector position and bit depth differ between them. Measure the active area of your original before choosing the group.

Qualifying the swap

Match interface family, bit depth and pin count first, then confirm pinout, timing and backlight against a sample or drawing — the process is described in our 5-step verification checklist.

Frequently asked questions

How many standard modules do you offer at 5-inch & 5.65-inch?

The groups above are drawn live from our catalog; contact us for the current full list with datasheets.

My original is a 5.65-inch 640x480 with a 40-pin connector.

Then the 18-bit 40-pin DE-mode variant group is your starting point — bit depth and pin count must match, not just resolution.

Do these need custom tooling?

No. Every module listed is a standard production part — samples ship without tooling or setup charges.

Related pages

TFT LCD Drop-in Replacement Guide

Replacement hub · RONEN DISPLAY

AT050TN33 replacement

Model guide · RONEN DISPLAY

AT056TN53 replacement

Model guide · RONEN DISPLAY

ZJ050NA-08C replacement

Model guide · RONEN DISPLAY

Find an LCD by size and resolution

How-to · RONEN DISPLAY

Need help specifying a display?

Send us your size, resolution, brightness, interface and operating temperature — our application engineers will come back with matching standard modules or a standard in-stock proposal within one working day. Request a quote →

Share this guide
LinkedInXRedditFacebookTelegramThreadsHacker NewsEmail