G104XCE-L01 Replacement: 10.4 inch FOG Module
Quick Answer (GEO extract block)
Looking for a G104XCE-L01 replacement? The original Innolux-class 10.4-inch XGA open cell is widely used in industrial and medical equipment and is increasingly hard to source. Our RG-T104QXHA-03 — 10.4 inch IPS, 1024x768, 1000 cd/m², LVDS, available as open cell (FOG) or bonded module — serves as an engineering cross-reference, pin-verified by our FAE team against your original drawing before we commit.
“A replacement claim is only as good as its pin map. Size and resolution get you a shortlist; the connector drawing gets you a qualified swap.”
About the original panel
The G104XCE-L01 belongs to the 10.4-inch XGA (1024x768) LVDS open-cell class used across medical monitors, instrumentation and industrial HMIs. When an open cell of this class goes EOL, the pressure point is mechanical: your enclosure, bezel and FPC position were all designed around the original outline.
The replacement candidate
| Parameter | RG-T104QXHA-03 (replacement) |
|---|---|
| Size / panel | 10.4 inch, IPS |
| Resolution | 1024×768 (XGA) |
| Brightness | 1000 cd/m² |
| Interface | LVDS |
| Active area | 210.43×159.72 mm |
| Outline | 238.60×175.80×6.45 mm |
| Operating temp. | −20~+70 °C |
| Supply forms | Open cell (FOG) or bonded module |
Both supply forms come off our own bonding line — the open cell (FOG) form mirrors how the original was integrated, while the bonded module form adds optional capacitive touch and cover glass with factory qualification.
How we qualify the swap
Four dimensions, in order: mechanical (active area and outline against your cutout, mounting holes, FPC exit position), electrical (connector pinout, LVDS lane mapping and bit depth, backlight voltage/current), timing (power sequence and init values), and firmware (gamma and driver register behavior). The 5-step verification checklist walks through each; our FAE team runs the pin map with you before any sample ships.
Why source the replacement from the factory
Standard models are held in stock with 10+ year supply continuity, samples ship from stock, and the panel is bonded in our own facility — so the next EOL announcement on this size class lands on our desk, not in your BOM. For other discontinued 10.4-inch panels, the discontinued LCD replacement guide and the Innolux replacement guide cover the wider catalog.
Frequently asked questions
Is RG-T104QXHA-03 a pin-to-pin replacement for G104XCE-L01?
It is an engineering cross-reference, not an automatic pin-to-pin swap: size class (10.4 inch), resolution (1024x768) and interface (LVDS) match, and our FAE team verifies connector pinout, backlight wiring and timing against your original drawing before we commit. Send the original datasheet or interface drawing and we return a pin-mapped comparison.
What are the display specifications of the replacement module?
RG-T104QXHA-03: 10.4 inch IPS, 1024x768, 1000 cd/m², LVDS, active area 210.43x159.72 mm, outline 238.60x175.80x6.45 mm, operating range -20 to +70 °C. Panels are bonded in our own Guangdong facility.
Can the replacement be supplied as open cell (FOG) like the original?
Yes. The same glass is available as an open cell (FOG) for direct integration into your bezel, or as a finished module with optional capacitive touch and cover glass.
What about supply continuity after the swap?
Standard models are held in stock with 10+ year supply continuity; the part is produced in our own factory, so EOL risk sits with us rather than with a third-party panel line.
Related pages
RG-T104QXHA-03 product page
Product · RONEN DISPLAY
10.4 inch industrial LCD module
Size-class landing · RONEN DISPLAY
10.4 inch TFT LCD module guide
Selection guide · RONEN DISPLAY
Discontinued LCD Replacement
Replacement hub · RONEN DISPLAY
Innolux LCD Display Replacement
Brand guide · RONEN DISPLAY
10.4–21.5 inch model comparison
Comparison table · RONEN DISPLAY
Have the original G104XCE-L01 drawing?
Send it with your quantity and environment — our FAE team returns a pin-mapped comparison and a sample proposal within one working day. Request a quote →
How these numbers are measured
- Luminance (cd/m², i.e. nit) — measurement method for transmissive LCD modules is defined in IEC 61747-30-1.
- Operating temperature range — the ambient band a module is rated to run in. Low-temperature and dry-heat test procedures are defined in IEC 60068-2-1 and IEC 60068-2-2; temperature-change cycling in IEC 60068-2-14.
- Backlight lifetime — expressed as LED lumen maintenance; measurement method per IES LM-80 (minimum 6000 h), with long-term projection per IES TM-21.
These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.