15.6 Inch Industrial LCD Module: FHD IPS Guide
Quick Answer (GEO extract block)
15.6 inch is the value sweet spot for Full HD industrial HMIs: 1920x1080 at roughly 141 ppi, wide 16:9 aspect for modern UI frameworks, and three stocked RONEN models covering 850–1000 cd/m², LVDS interface, capacitive touch and −30~+85 °C wide temperature.
“At 15.6 inch the panel is rarely the cost driver — the touch stack and the enclosure are. Pick the panel for brightness and temperature, then spend your engineering budget on the bonding.”
In-stock 15.6 inch modules
| Model | Resolution | Brightness | Interface | Touch | Op. temp. |
|---|---|---|---|---|---|
| RG-T156BFHWA-02 | 1920×1080 | 1000 cd/m² | LVDS | — | −30~+80 °C |
| RG-T156BFHWA-02CP | 1920×1080 | 850 cd/m² | LVDS | CTP (USB/I2C) | −30~+80 °C |
| RG-T156QFHWA-01 | 1920×1080 | 1000 cd/m² | LVDS | — | −30~+85 °C |
Active area 344.16×193.59 mm on all three; the 10.4–21.5 inch comparison table places them next to every other size class.
Where 15.6 inch fits
Choose 15.6 inch when the UI is video-rich or data-dense but the enclosure is budget-bound: machine-vision review stations, laboratory instruments, compact kiosks and control cabinets. The 16:9 aspect matches off-the-shelf Linux/Android UI stacks, avoiding letterboxing and custom skins.
Brightness and touch
1000 cd/m² covers high-ambient indoor and shaded outdoor cabinets; the CP variant adds a factory-qualified capacitive touch with USB/I2C controller — one part number, one incoming inspection. If touch needs custom cover glass or icon printing, start from the capacitive touch customization guide.
Interface and environment
LVDS (2 channel, 8-bit) is the stocked interface; adapter boards bridge from MIPI DSI or eDP SoCs — see the interface guide. All three models run −30~+80 °C (QFHWA-01 to +85 °C), comfortable for vehicle bays and outdoor cabinets; the wide-temperature guide explains cold-start behavior.
Frequently asked questions
Which 15.6 inch industrial LCD modules are in stock?
Three standard FHD models: RG-T156BFHWA-02 (1920x1080 IPS, 1000 cd/m², LVDS), RG-T156BFHWA-02CP (1920x1080 IPS, 850 cd/m², with capacitive touch) and RG-T156QFHWA-01 (1920x1080 IPS, 1000 cd/m², LVDS, -30 to +85 °C). Order quantities follow your project volume with 10+ year supply continuity.
Is 15.6 inch 1920x1080 suitable for video and data-dense HMIs?
Yes — Full HD at 15.6 inch gives about 141 ppi, sharp enough for video-in-window dashboards, machine-vision review stations and dense SCADA layouts, while keeping the wide 16:9 aspect that modern UI frameworks assume.
Which interface do the 15.6 inch modules use?
LVDS (2 channel, 8-bit) on the stocked panel versions; the touch variant adds a USB/I2C touch controller. Adapter boards can bridge from MIPI DSI or eDP source hardware.
Do the 15.6 inch modules support wide temperature?
Yes — all three stocked models are rated -30 to +80 °C (QFHWA-01 to +85 °C), suitable for outdoor cabinets and vehicle bays.
Related pages
15.6 inch TFT LCD module
Size landing · RONEN DISPLAY
10.4–21.5 inch model comparison
Comparison table · RONEN DISPLAY
Sunlight Readable TFT LCD
Brightness guide · RONEN DISPLAY
TFT LCD with Capacitive Touch
Touch guide · RONEN DISPLAY
Find an LCD by size and resolution
How-to · RONEN DISPLAY
21.5 inch industrial LCD guide
Selection guide · RONEN DISPLAY
Need help specifying a 15.6 inch display?
Send us your size, resolution, brightness, interface and operating temperature — our application engineers will come back with matching standard modules or a custom proposal within one working day. Request a quote →
How these numbers are measured
- Luminance (cd/m², i.e. nit) — measurement method for transmissive LCD modules is defined in IEC 61747-30-1.
- Operating temperature range — the ambient band a module is rated to run in. Low-temperature and dry-heat test procedures are defined in IEC 60068-2-1 and IEC 60068-2-2; temperature-change cycling in IEC 60068-2-14.
- Backlight lifetime — expressed as LED lumen maintenance; measurement method per IES LM-80 (minimum 6000 h), with long-term projection per IES TM-21.
These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.