Custom Service

Custom Cover Glass & Lens Solutions for TFT Modules

The front surface of a display is where the product meets the user and the environment. A custom cover glass or lens lets you shape the cut-out, choose the thickness and edge treatment, apply anti-glare or anti-reflection coating, and bond it optically to the panel. This page covers what is customisable and why the lens and the touch stack must be specified together.

What Can Be Customised

OptionWhat it does
Shape & cut-outCustom outline, holes for buttons or cameras
Thickness & edgeCNC cut, chamfer, polish for ruggedness and feel
Surface coatingAnti-glare (AG), anti-reflection (AR), or both
OCA bondingLens bonded to panel, removing the air gap

Coating and Bonding: the Readability Levers

Anti-glare diffuses reflected light to cut glare; anti-reflection reduces surface reflectance for higher contrast. OCA optical bonding goes further by removing the internal air gap that washes out the image under sunlight — which is why it is the standard choice for outdoor and marine displays. The trade-off between air bonding and optical bonding (cost, repairability, optical gain) is covered in our dedicated guide.

Specify Lens and Touch Together

A thicker or coated lens changes the capacitive touch stack, so the touch controller must be configured for the final lens — not for a bare panel. Bring the lens and the touch into the same specification so the controller burning accounts for the real front surface.

Matching Standard Panels

Cover-glass customisation applies across the catalog. These standard modules are frequent lens subjects:

Related Guides

Frequently Asked Questions

What can be customised on the cover glass?

Shape and cut-out (including cut-outs for buttons or cameras), thickness, edge treatment (CNC, chamfer, polish), and surface coating — anti-glare, anti-reflection, or both, applied to the lens.

Why bond the cover lens to the panel?

OCA optical bonding removes the air gap that causes internal reflection and washout, improving contrast and sunlight readability and also sealing the assembly against dust and moisture. See our air-vs-optical-bonding guide for the trade-off.

Does a custom lens affect touch?

A thicker or coated lens changes the touch stack slightly; the touch controller configuration must be matched to the final lens. Specify the lens together with the touch so the controller burning accounts for it.

Talk to Our Engineers

Send your lens shape, coating and bonding requirements to sales@odmlcd.com — we will reply with a cover-glass proposal and the touch configuration it implies.

Coating Choices: AR, AG, and AF

Cover glass is where readability and durability are won or lost. An anti-reflective (AR) coating cuts glare outdoors, an anti-glare (AG) etch softens reflections for indoor readability, and an anti-fingerprint (AF) layer eases cleaning on shared equipment. Pick by the lighting and who touches the screen.

Lens and touch as one stack

Specify the lens and the touch sensor together so the bond line, optical stack, and flex exit line up on the first try. A clean drawing of the bezel and gasket prevents edge ingress and keeps the assembly sealed in the field.

When to bond

Optical bonding pays off wherever glare or condensation hurts. It removes the air gap that traps reflections and moisture, lifting contrast outdoors and stopping fog on cold starts. For a panel that must read at a glance, bonding is usually worth the step.